Відео

I guess that the type of monitor you are describing at McDonald's was a touch-screen device. The product shown here is not a touch screen (although we sell those too). Non-touch screens are typically used for in-store advertising but can also be used in other spaces to relay messaging to customers.

Glad you found the video useful :-)

No worries, I'm glad it was useful to you. All the best www.printdesigns.com

No worries at all. Glad the video was useful. Best wishes www.printdesigns.com

Hi, This type of banner stand is designed only for internal use. Sure, you could put some weight over the support feet of the stand to anchor it but if a strong wind hits it, the feet or the vertical support pole of the banner stand would probably get bent! I've seen this type of banner outdoors in all sorts of creative ways (anchoring the feet, tying the support pole to a fence/wall etc) but ultimately the stand isn't designed for external use so it will get trashed. Take a look at our website www.printdesigns.com as you will find some outdoor-durable roller banners that are beefier than this type of stand and better suited for external use! Hope this helps www.printdesigns.com

You could use a small nail, a matchstick or cocktail stick or a small allen/hex key

No worries Matt, glad the video was useful! Best wishes www.pintdesigns.com

What tools do you need?

Hi, you should use a good quality permanent adhesive tape. We use 50mm tesa 4965. It works well for us based on the printing materials we apply to roller banner stands at www.printdesigns.com but you should test adhesion to the particular print material you are using to make sure it holds OK!

Whoops! sorry to hear about this. The banner can be fixed but it's a fiddly process. The first thing you need to do it remove the screws from the end plate of the stand that has the flat spindle protruding from it. With the screws removed you can rotate the end plate of the stand clockwise while it is held flush to the casing of the stand. The flat head of the spindle should be still poking through the slot when you rotate the end plate. Be careful here because as you rotate the end plate with the spindle poking through the slot, the tension on the spring increases inside the stand. It is easy to accidentally pull the end plate away whereby the spindle will pop out of the slot and 'lose' all of the tension. Also be very careful that the end plate does not fly out of your hands whilst turning it or you could hurt yourself! We wear gloves and safety goggles when doing this. You need to give this end plate about 20-25 turns after which the print should be wound back into the stand. Once the print is wound in, put the screws back onto the end plate to secure it. Again, be careful that you don't pull the end plate away from the stand and allow the spindle to pop out of it's slot while doing this or you will need to start over! I hope this helps and good luck.

Thank you!

No problem, i'm glad the video was useful. You will need to use a strong double sided tape to attach the print. After sticking the print to the stand you can over-tape the join between the graphic and the stand with parcel tape. This will make the join more secure!

Hi, did you purchase your screen from Printdesigns? If so, please just contact us at sales@printdesigns.com and one of our support team will be able to assist.

Hi, you can find our prices for this screen here: www.printdesigns.com/digital-signage/digital-display-screens/android-freestanding-digital-poster if you want to drop an email to sales@printdesigns.com with your details, we can provide a quote including shipping. Best wishes, www.printdesigns.com